Wind, Swell and Rouge Waves
Take it to the MAX! Anatomy of a Wave
In Oceanography and Seamanship, William G. Van Dorn provided an example of what the wave heights would be if a steady 33 mph (30 knot) wind blew for 24 hours over a fetch of 340 miles.
|
- Wind strength. The wind must be moving faster than the wave crests for energy to be transferred.
- Wind duration. Strong wind that does not blow for a long period will not generate large waves.
- Fetch. This is the uninterrupted distance over which the wind blows without significant change in direction.
After the wind begins to blow for a while, the waves get higher from trough to crest, and both the wave length and period become longer. As the wind continues or strengthens, the water first forms whitecaps and eventually the waves start to break. This is referred to as a fully developed sea.
Take it to the MAX! Beaufort Wind Scale
"Stolt Surf", North Pacific 1977 The following images are from the chemical tanker ship "Stolt Surf", built in 1970, caught in a large storm in the North Pacific Ocean. The largest waves of the storm broke over the Bridge, more than 72 feet (22 meter) high. Images © Karsten Petersen. Used by permission. Going into the trough of a wave Riding up to the next peak Nearly at the crest Topping the crest...just to have another huge wave behind it. |
The longer the wave, the faster it travels. As waves leave a storm area, they tend to sort themselves out with the long ones ahead of the short ones, and the energy is simultaneously spread out over an increasingly larger area. As the waves close in on the coast, they begin to feel the bottom and their direction of travel might change due to the contour of the land. Eventually, the waves run ashore, increasing in height up to 1.5 times their height in deep water, finally breaking up as surf.
There are many sailor tales of "rogue waves", "freak waves", "three sisters" and other "killer waves". Properly called "extreme storm waves" these tales were ridiculed and mariners were accused of using them as an excuse to cover their own mistakes in wrecks. Rogue waves are simply unusually large waves appearing in a set of smaller waves.
Some of the characteristics of rogue waves are:
- their height is greater than twice the size of surrounding waves,
- they often come unexpectedly from directions other than prevailing wind and waves, and
- they are unpredictable.
Just recently, a series of three waves, about 70 foot tall, crashed down on the Norwegian Dawn cruise ship in April 2005. The average waves that day were 25 to 30 feet high before these monster waves struck. The watch officer on the Norwegian Dawn stated that all the waves were very large, and that all were roughly the same height. On the third wave, he said, the ship's bow took "heavy green seas", which cascaded directly over the bow and struck the forward part of the vessel’s superstructure.
What causes these enormous waves? Generally they form because of swells, while traveling across the ocean, do so at different speeds and directions. As these swells pass through one another their crests, troughs, and lengths happen to coincide and reinforce each other, combining to form unusually large waves that tower then disappear. If the swell are travelling in the same direction, these mountainous waves may last for several minutes before subsiding.
It is very seldom that huge waves over 65 feet (20 meters) are developed and normally sailors do not even see them, because ships nowadays will try to avoid such conditions by altering course before the storm hits. But they do occur.